|
Product overview:
The product absorbs light to inhibit the fluorescent whitening agent on chemical fiber, cotton fabric and paper products, so that the treated fabric no longer produces fluorescence, and is a fluorescent remover of fluorescent whitening agent on textiles.
Product character:
The product is convenient to use;
It can effectively inhibit the fluorescence of fluorescent whitening agent on textiles.
Product performance:
Appearance: Light yellow liquid
Ionicity: Weak cationic
pH:8-11
Density: 1.0-1.1 g/cm3
Viscosity: Less than 100 cps
Solubility: Soluble in water
Application methods:
The dosage of the product needs to be adjusted according to the different conditions such as the amount of fluorescent whitening agent on the fabric and the treatment temperature. Generally, the recommended dosage is 0.5-2% weight ratio to fabric.
1. Padding method:
Suggested process: padding → drying.
2. Impregnation method:
Suggested process: fabric → dipping (dipping evenly at 40-50℃ for 15-30 minutes)
The dehydration (reclaiming the thrown solution and adding it into the impregnation tank) → drying.
Precautions:
1. Pre-test should be carried out before mass production to confirm the compatibility between various additives;
2. The specific dosage of the product needs to be pre-tested, and then mass production will be carried out after the determination is qualified;
3. According to different treatment conditions, the influence of color of the fabric to be treated needs to be tested in small samples to verify its applicability.
Packing:
25 kg/barrel; Or pack according to customer requirements.
Storage:
Store in a place away from light, dry and well ventilated;
It is forbidden to store in high temperature, open air or places with fire sources.
All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.
|
